BZRJQ - PRO-TECH SEMI-GLOSS ENAMEL WHT, 4600

  • MSDS: BZRJQ
  • Manufacturer: SINCLAIR PAINT CO
  • Product Name: PRO-TECH SEMI-GLOSS ENAMEL WHT, 4600
  • National Stock Number: 8010-00N065516
Product Identification

Product ID:PRO-TECH SEMI-GLOSS ENAMEL WHT, 4600
MSDS Date:06/21/1994
FSC:8010
NIIN:00N065516
MSDS Number: BZRJQ

Responsible Party
SINCLAIR PAINT CO
6100 SOUTH GARFIELD AVE
LOS ANGELES, CA 90040
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 213-888-8888

Preparer: J.G. PRINZ

Cage: 0U0K0

Contractor
SINCLAIR PAINT COMPANY
LOS ANGELES, CA 90040 US

Telephone: 213-888-8888

Cage: 0U0K0

Ingredients

0.2 @ 68F.

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


COATING - 1.54 LBS/GAL (185

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY CAUSE IRRITATION TO SKIN,
EYES & INTESTINAL SYSTEM. INHAL:ADVERSE HEALTH EFFECTS FROM VAPORS
OR SPRAY MISTS IN POORLY VENTILATED AREAS MAY INCLUDE IRRITATION OF
MUCOUS MEMBRANES OF NOSE, THR OAT & RESPIRATORY TRACT & SYMPTOMS OF
HEADACHE & NAUSEA. EYES:INDIRECT CONTACT MAY CAUSE IRRITATION.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:SKIN CONTACT:PROLONGED & REPEATED
CONTACT W/PRODUCT MAY CAUSE IRRITATION. SKIN ABSORPTION:REDNESS,
DRYING OR OTHER SIGNS OF IRRITATION OR CONTACT DERMATITIS.
INGEST:CAN CAUSE GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING &
DIARRHEA. CHRONIC:NONE KNOWN.
Medical Cond Aggravated by Exposure:NONE.

First Aid

First Aid:SKIN:CLEANSE THOROUGHLY W/SOAP & WATER. REMOVE ALL
CONTAMINATED CLOTHING. EYES:FLUSH IMMEDIATELY W/LARGE AMOUNTS OF
WATER FOR AT LEAST 15 MINUTES. TAKE TO MD FOR MEDICAL ATTENTION.
INHAL:REMOVE TO FRE SH AIR. INGEST:DRINK 1-8 GLASSES OF WATER TO
DILUTE. DO NOT INDUCE VOMITING. CONSULT MD OR POISON CONTROL CENTER
IMMEDIATELY. TREAT SYMPTOMATICALLY.

Fire Fighting

Lower Limits:2.6%
Upper Limits:12.6%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . THIS IS A WATER-BASED COATING. WILL NOT SUPPORT
COMBUSTION.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HIGH
TEMPERATURES MAY BURST DUE TO BUILD UP OF STEAM PRESSURE.

Accidental Release

Spill Release Procedures:DIKE, CONTAIN OR ABSORB W/INERT MATERIAL
(I.E., SAND, VERMICULITE, ETC). TRANSFER TO CONTAINERS FOR RECOVERY
OR DISPOSAL. PREVENT RUNOFF INTO SEWERS, STREAMS OR OTHER BODIES OF
WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT EXPOSE TO EXTREMES IN
TEMPERATURES. AVOID EXPOSURE TO HIGH TEMPERATURES. DO NOT ALLOW TO
FREEZE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED. IF TLV IS EXCEEDED, USE
NIOSH/MSHA APPROVED ORGANIC VAPOR & MIST PROTECTION.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL &/OR LOCAL) VENTILATION TO
MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:RESISTANT GLOVES SUCH AS POLYETHYLENE.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WEAR IMPERVIOUS CLOTHING.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE & WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE ING 1
Vapor Density:LTR/AIR
Spec Gravity:1.3 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETELY
Appearance and Odor:TYPICAL FOR WATER BASED LATEX COATING.

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS: CARBON
DIOXIDE, CARBON MONOXIDE, ETC.

Disposal

Waste Disposal Methods:DISPOSE OF I/A/W ALL LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.